Check full list of data fields and their usage. These fields are displayed in the data pages and the data bar:
•Accumulated climb: Total amount climbed from the begining of itinerary up to the current position.
•Accumulated descent: Total amount descended from the begining of itinerary up to the current position.
•Air pressure: Present atmospheric pressure provided by the barometric altimeter.
•Altitude at next: Predicted altitude to next waypoint if current trajectory is maintained.
•Altitude ground level: Altitude from the ground level.
•Altitude: Altitude from the sea level.
•Ascent to destination: Difference between the altitude of destination and current altitude.
•Ascent to next: Difference between the altitude of current waypoint and the next waypoint.
•Barometric altitude: Altitude provided by the barometric altimeter.
•Battery: Remaining energy in your device.
•Bearing to next: Course towards to the next waypoint.
•Bearing: Current course.
•Chronometer: Starts counting when started.
•City: Current city.
•Compass: Compass representation.
•Coordinates: Coordinates of the current position.
•Croquis: Image displaying manoeuvres.
•Current depth: Current depth value taking as reference the nautical chart.
•Current pace: Speed in minute/kilometer.
•Current power: Current power at this moment.
•Depth at next: Depth value at next waypoint
•Depth at prow line: Current depth value at prow line.
•Deviation from route: Distance to active route.
•Differential GPS: GPS gives differential signal (submetric accuracy).
•Distance to destination: Distance to destination (last waypoint of the route).
•Distance to next radar: Distance to next radar point.
•Distance to next: Distance to the next waypoint.
•Distance to Virtual Coach: Distance between your current position and the position of the ‘Virtual Coach’.
•Estimated hour at destination: Estimated time of arrival to destination (last waypoint of the route) at present speed.
•Estimated hour at next: Estimated time of arrival to the next waypoint (at present speed).
•Estimated time to destination (cruise): Estimated time to reach destination (last waypoint of the route) at cruise speed.
•Estimated time to destination: Estimated time to reach destination (last waypoint of the route) at current speed.
•Estimated time to next (cruise): Estimated time to reach next waypoint at cruise speed.
•Estimated time to next: Estimated time to reach next waypoint at current speed.
•Free memory: Remaining memory in your device.
•GOTO arrow: Arrow that indicates the course towards to the next waypoint.
•GPS altitude: Present altitude provided by GPS rerceives via satellites.
•Graph: Representation of the track being covered.
•HDOP: Horizontal Dilution Of Precision (estimated current accuracy of the GPS).
•%HRR: Heart Rate Reserve.
•Heart rate zone (% Max.): Predefined heart rate intensity zones.
•Heart rate zone (% Max-Rest): Predefined heart rate intensity zones (Cardiac frequency in reserve).
•L/D instant glide ratio: Glide ratio dividing horizontal distance by vertical (descending).
•L/D goal: Minimum glide ratio required to reach your goal (going through all intermediate waypoints).
•L/D required: Minimum glide ratio required to reach next waypoint (distance to waypoint divided by waypoint’s altitude over ground level).
•Land altitude: Altitude of the land provided by the 3D relief map (*.CDEM).
•Leg odometer: Distance covered from the begining of the current leg section up to the current position. Value reseted every time a new leg section is started.
•Leg chronometer: Time elapsing the current leg section from the begining of the current leg section up to the current position.
•Leg mean speed: Average of all speeds values from the begining of the current leg section up to the current position.
•Leg mean pace: Average of all pace values from the begining of the current leg section up to the current position (speed in minute/kilometer).
•Leg accumulated climb: Total amount climbed from the begining of the current leg section up to the current position.
•Leg accumulated descent: Total amount descended from the begining of the current leg section up to the current position.
•Magnetic bearing: Course followed according to the inner device compass.
•Maximum altitude: Reached during your itinerary.
•Maximum power: Maximum power achieved from the begining of itinerary.
•Maximum speed: Maximum speed in current itinerary.
•Mean moving pace: Average of all pace values above the minimum speed movement.
•Mean moving speed: Average of all speeds values above the minimum speed movement.
•Mean pace: Average of all pace values.
•Mean power: Average of all power values.
•Mean speed: Average of all speeds values.
•Moving pace: Average of all pace values avoiding stopped points.
•Next radar speed: Displays maximum speed allowed by the next radar.
•Next slope: Slope till the distance set at 'Next slope distance'.
•Next waypoint name: Name of the following waypoint.
•Normal acceleration: Perpendicular to movement in circular movements.
•Number of points: Track points saved up to current position.
•Partial CO2 emission: CO2 emission from the beginning of itinerary.
•Partial energy: Partial odometer energy.
•Partial mean speed: Average of all speeds values from the beginning of itinerary up to this moment.
•PDOP: Position Dilution Of Precision (estimated current position accuracy of the GPS).
•Place name: Name of the element of your current position.
•Precision: Error margin of the GPS.
•Radar icon: Displays an icon when entering the radius of a radar.
•Radius turn: Radius of the turn that you are taking at the moment.
•Route graph: Representation of the route being covered.
•Route percentage: Percentage of the route that has been already done.
•Signpost: If available, road indications are displayed.
•Slope to destination: Remaining slope till destination is reached.
•Slope to next kilometer: Remaining slope from your current position to 1 kilometer.
•Slope to next waypoint: Slope from your current position to next waypoint.
•Slope: Slope of your current movement.
•Speed limit: Speed limit established for the current road.
•Speed: Current speed.
•Stopped time: Total amount of time without moving.
•Sunrise: Sunrise time.
•Sunset: Sunset time.
•Tangential acceleration: Component of linear acceleration tangent to the path.
•Temperature: Current temperature.
•Time in movement: Total amount of time moving.
•Time to Virtual Coach: Time difference between you and the ‘Virtual Coach’.
•Time without paquet: Elapsed time since last time GPS signal was received.
•Time: Current time according to the selected time zone.
•Total CO2 emission: CO2 emission of all your trips.
•Total energy: Total odometer energy.
•Total odometer: Accumulated distance of all your trips.
•Track file name: Name of the current track.
•Trip odometer: Distance covered from the beginning of itinerary.
•Used satellites: Satellites fixed in current position.
•VDOP: Vertical Dilution Of Precision (estimated current vertical accuracy of the GPS).
•Velocity made good: Right direction’s velocity component to the following waypoint.
•Vertical speed: Descending speed (vertical component of speed value).
•Virtual free memory: Virtual free memory in your device.