If you do not get a correct adjustment when you superpose a track, a route or a waypoint onto a calibrated map, it is quite probably that the map’s calibration has not been carried out correctly. Use the revise calibration function to solve these errors:
1. Open the map that you want to revise.
2. Select the menu option ‘Maps > Revise calibration of a map’. You can also choose the option Revise calibration of a map in the section Multimapas, advanced… that you will find in the context menu of the map.
3. In either case, the calibration window will open. Check that all the information you have written is correct (projection, datum, points…) or you can introduce new calibration points, replacing old ones. Adding new points will not solve the problem because the old points may not be correct.
4. If you do not know the projection data, establish an Automatic projection. The characteristics of the Automatic option are adequate for almost all maps.