11.11.1   Tracklog

Configure the type of track that Land will generate from your navigation:

•     Recording interval:

•     By time: Set the time to create every new track point.

•     By distance: Set the distance to create every new track point.

•     Automatic: Track points will be automatically recorded when changing course and depending on the speed.

•     Recovery time: When Land is suddenly switch off, if you turn the device on during the established interval, the previous data is recovered and displayed again.

•     File format: Set the track format of the resulting file.

•     Default track naming: Set the track naming that will be used by default to rename your tracks.

•     Weak signal filter: If GPS signal is not reliable, points are ignored while recording track. This prevents the recording of non reliable data.

•     Track color: Set the color for the generated track.

•     Track thickness: Set the thickness for the generated track.

•     Points shown without reduction: Recorded track is visible at map window, but only the latest track points are shown as they are recorded (with no reduction of points). Set how long this section is.

•     Reduction for previous points: It is highly recommended to make a reduction of the rest of the displayed track as well. Set a reduction to display the previous points of the recorded track (all except the latest points).