12   APPENDIX: DATA FIELDS

Check full list of data fields and their usage. These fields are displayed in the data pages and object properties:

Distances

•     Deviation from route: Distance to active route.

•     Distance to TrackAttack: Distance between your current position and the position of the ‘TrackAttack’.

•     Distance to next radar: Distance to next radar point.

•     Distance to destination: Distance to destination (last waypoint of the route).

•     Distance to next: Distance to the next waypoint.

•     Lap odometer: Distance covered from the begining of the current lap section up to the current position. Value reseted every time a new lap section is started.

•     Profile odometer: Distance covered from the beginning of itinerary. Value reseted every time GPS is turned off.

•     Route percentage: Percentage of the route that has been already done.

•     Total odometer: Accumulated distance of all your trips. Value not automatically reseted every time GPS is turned off. (GPS can calculate the total distance using different data calculations).

•     Trip odometer: Distance covered from the beginning of itinerary. Value reseted every time GPS is turned off.

Altitudes

•     Altitude at next: Predicted altitude to next waypoint if current trajectory is maintained.

•     Altitude: Altitude from the sea level.

•     Altitude difference to destination: Difference between the altitude of destination and current altitude.

•     Altitude difference to next: Difference between the altitude of the next waypoint and current altitude.

•     Altitude ground level: Altitude from the ground level.

•     Ascent to destination: Ascent till destination is reached.

•     Barometric altitude: Altitude provided by the barometric altimeter.

•     Current depth: Current depth value taking as reference the nautical chart.

•     Depth at next: Depth value at next waypoint

•     Depth at prow line: Current depth value at prow line.

•     GPS altitude: Present altitude provided by GPS rerceives via satellites.

•     Graph: Representation of the track being covered.

•     Land altitude: Altitude of the land provided by the 3D relief map (*.CDEM).

•     Lap climb: Total amount climbed from the begining of the current lap section up to the current position.

•     Lap descent: Total amount descended from the begining of the current lap section up to the current position.

•     Maximum altitude: Reached during your itinerary.

•     Slope: Slope of your current movement.

•     Slope at next: Slope till the distance set at 'Next slope distance'.

•     Trip ascent: Total amount climbed from the begining of itinerary up to the current position.

•     Trip descent: Total amount descended from the begining of itinerary up to the current position.

Times

•     Chronometer: Starts counting when started.

•     Estimated hour at destination: Estimated time of arrival to destination (last waypoint of the route) at present speed.

•     Estimated hour at next: Estimated time of arrival to the next waypoint (at present speed).

•     Estimated time to destination: Estimated time to reach destination (last waypoint of the route) at current speed.

•     Estimated time to destination (cruise): Estimated time to reach destination (last waypoint of the route) at cruise speed.

•     Estimated time to next: Estimated time to reach next waypoint at current speed.

•     Estimated time to next (cruise): Estimated time to reach next waypoint at cruise speed.

•     Lap chronometer: Time elapsing the current lap section from the begining of the current lap section up to the current position.

•     Stopped time: Total amount of time without moving.

•     Sunrise: Sunrise time.

•     Sunset: Sunset time.

•     Time: Current time according to the selected time zone.

•     Time to TrackAttack: Time difference between you and the ‘TrackAttack’.

•     Time in movement: Total amount of time moving.

•     Time without package: Elapsed time since last time GPS signal was received.

Speeds

•     Current pace: Speed in minute/kilometer.

•     Lap mean speed: Average of all speeds values from the begining of the current lap section up to the current position.

•     Lap pace: Average of all pace values from the begining of the current lap section up to the current position (speed in minute/kilometer).

•     Maximum speed: Maximum speed in current itinerary.

•     Mean moving speed: Average of all speeds values above the minimum speed movement.

•     Mean speed: Average of all speeds values.

•     Mean moving pace: Average of all pace values above the minimum speed movement.

•     Mean pace: Average of all pace values.

•     Moving pace: Average of all pace values avoiding stopped points.

•     Next radar speed: Displays maximum speed allowed by the next radar.

•     Normal acceleration: Perpendicular to movement in circular movements.

•     Partial mean speed: Average of all speeds values from the beginning of itinerary up to this moment.

•     Speed: Current speed.

•     Speed limit: Speed limit established for the current road.

•     Tangential acceleration: Component of linear acceleration tangent to the path.

•     Velocity made good: Right direction’s velocity component to the following waypoint.

•     Vertical speed: Descending speed (vertical component of speed value).

Bearings

•     Bearing: Current course.

•     Bearing to next: Course towards to the next waypoint.

•     Compass: Compass representation.

•     GOTO arrow: Arrow that indicates the course towards to the next waypoint.

•     Magnetic bearing: Course followed according to the inner device compass.

Effort

•     % HRR: Heart Rate Reserve.

•     % Maximum heart rate: Maximum heart rate.

•     Accumulated power: Total amount power from the begining of itinerary up to the current position.

•     Cadence: Current cadence at this moment (based on pedal stroke frequency).

•     Current power: Current power at this moment (based on pedal stroke frequency).

•     Heart rate zone (% Max.): Predefined heart rate intensity zones.

•     Heart rate zone (% Max-Rest): Predefined heart rate intensity zones (Cardiac frequency in reserve).

•     Heart rate: Current heart rate at this moment.

•     Instantaneous cadence: Current cadence at this moment (based on power meter data).

•     Instantaneous power: Current power at this moment (based on power meter data).

•     Left (or combined) pedal smoothness: How smoothly power is delivered to the left pedal.

•     Left torque effectiveness: How much of the power delivered to the left pedal is pushing it forward.

•     Maximum power: Maximum power achieved from the begining of itinerary.

•     Mean power: Average of all power values.

•     OCA: Optimum chainring angle.

•     Pedal power: Relative power left-right.

•     Powermeter: Power of the last pedaling.

•     Right pedal smoothness: How smoothly power is delivered to the right pedal.

•     Right torque effectiveness: How much of the power delivered to the right pedal is pushing it forward.

•     Total energy: Total odometer energy.

•     Trip energy: Partial odometer energy.

GPS

•     Coordinates: Coordinates of the current position.

•     Differential GPS: GPS gives differential signal (submetric accuracy).

•     HDOP: Horizontal Dilution Of Precision (estimated current accuracy of the GPS).

•     PDOP: Position Dilution Of Precision (estimated current position accuracy of the GPS).

•     Precision: Error margin of the GPS.

•     Used satellites: Satellites fixed in current position.

•     VDOP: Vertical Dilution Of Precision (estimated current vertical accuracy of the GPS).

Flight

•     Altitude ground level: Altitude from the ground level.

•     L/D goal: Minimum glide ratio required to reach your goal (going through all intermediate waypoints).

•     L/D instant glide ratio: Glide ratio dividing horizontal distance by vertical (descending).

•     L/D required: Minimum glide ratio required to reach next waypoint (distance to waypoint divided by waypoint’s altitude over ground level).

•     Land altitude: Altitude of the land provided by the 3D relief map (*.CDEM).

•     Slope to next waypoint: Slope from your current position to next waypoint.

•     Slope to destination: Remaining slope till destination is reached.

•     Vertical speed: Descending speed (vertical component of speed value).

General

•     Air pressure: Present atmospheric pressure provided by the barometric altimeter.

•     Battery: Remaining energy in your device.

•     City: Current city.

•     Croquis: Image displaying manoeuvres.

•     Current lap: Identifies the lap where you are at the present moment.

•     File name: Name of the current track.

•     Free memory: Remaining memory in your device.

•     Next waypoint name: Name of the following waypoint.

•     Next2 waypoint icon: Icon associated to the waypoint following the next waypoint.

•     Number of points: Track points saved up to current position.

•     Place name: Name of the element of your current position.

•     Radar icon: Displays an icon when entering the radius of a radar.

•     Radius turn: Radius of the turn that you are taking at the moment.

•     Relative humidity: Current humidity rate.

•     Signpost: If available, road indications are displayed.

•     Temperature: Current temperature.

•     Virtual free memory: Virtual free memory in your device.