6   APPENDIX: DATA FIELDS

 

Check full list of data fields and their usage. These fields are displayed in the data pages and object properties:

 

Distances

 

•    Deviation from route: Distance to active route.

 

•    Distance to TrackAttack: Distance between your current position and the position of the ‘TrackAttack’.

 

•    Distance to next radar: Distance to next radar point.

 

•    Distance to destination: Distance to destination (last waypoint of the route).

 

•    Distance to next: Distance to the next waypoint.

 

•    Lap odometer: Distance covered from the begining of the current lap section up to the current position. Value reseted every time a new lap section is started.

 

•    Profile odometer:  Accumulated distance of your current profile (hiking, mountain bike...). Value not automatically reseted every time TwoNav is turned off.

 

•    Route percentage: Percentage of the route that has been already done.

 

•    Total odometer: Accumulated distance of all your trips. Value not automatically reseted every time GPS is turned off. GPS can calculate the total distance using different data calculations.

 

•    Trip odometer: Distance covered from the beginning of itinerary. Value reseted every time GPS is turned off.

 

Altitudes

 

•    Altitude at next: Predicted altitude to next waypoint if current trajectory is maintained.

 

•    Altitude: Altitude from the sea level.

 

 

•    Altitude difference to destination: Difference between the altitude of destination and current altitude.

 

•    Altitude difference to next: Difference between the altitude of the next waypoint and current altitude.

 

•    Altitude ground level: Altitude from the ground level.

 

•    Ascent to destination: Ascent till destination is reached.

 

•    Barometric altitude: Altitude provided by the barometric altimeter.

 

•    Current depth: Current depth value taking as reference the nautical chart.

 

•    Depth at next: Depth value at next waypoint

 

•    Depth at prow line: Current depth value at prow line.

 

•    GPS altitude: Present altitude provided by GPS rerceives via satellites.

 

•    Graph: Representation of the track being covered.

 

•    Land altitude: Altitude of the land provided by the 3D relief map (*.CDEM).

 

•    Lap climb: Total amount climbed from the begining of the current lap section up to the current position.

 

•    Lap descent: Total amount descended from the begining of the current lap section up to the current position.

 

•    Maximum altitude: Reached during your itinerary.

 

•    Slope: Slope of your current movement.

 

•    Slope at next: Slope till the distance set at 'Next slope distance'.

 

•    Trip ascent: Total amount climbed from the begining of itinerary up to the current position.

 

•    Trip descent: Total amount descended from the begining of itinerary up to the current position.

 

Times

 

•    Chronometer: Starts counting when started.

 

•    Estimated hour at destination: Estimated time of arrival to destination (last waypoint of the route) at present speed.

 

•    Estimated hour at next: Estimated time of arrival to the next waypoint (at present speed).

 

•    Estimated time to destination: Estimated time to reach destination (last waypoint of the route) at current speed.

 

•    Estimated time to destination (cruise): Estimated time to reach destination (last waypoint of the route) at cruise speed.

 

•    Estimated time to next: Estimated time to reach next waypoint at current speed.

 

•    Estimated time to next (cruise): Estimated time to reach next waypoint at cruise speed.

 

•    Lap chronometer: Time elapsing the current lap section from the begining of the current lap section up to the current position.

 

•    Stopped time: Total amount of time without moving.

 

•    Sunrise: Sunrise time.

 

•    Sunset: Sunset time.

 

•    Time: Current time according to the selected time zone.

 

•    Time to TrackAttack: Time difference between you and the ‘TrackAttack’.

 

•    Time in movement: Total amount of time moving.

 

•    Time without package: Elapsed time since last time GPS signal was received.

 

Speeds

 

•    Current pace: Speed in minute/kilometer.

 

•    Lap mean speed: Average of all speeds values from the begining of the current lap section up to the current position.

 

•    Lap pace: Average of all pace values from the begining of the current lap section up to the current position (speed in minute/kilometer).

 

•    Maximum speed: Maximum speed in current itinerary.

 

•    Mean moving speed: Average of all speeds values above the minimum speed movement.

 

•    Mean speed: Average of all speeds values.

 

•    Mean moving pace: Average of all pace values above the minimum speed movement.

 

•    Mean pace: Average of all pace values.

 

•    Moving pace: Average of all pace values avoiding stopped points.

 

•    Next radar speed: Displays maximum speed allowed by the next radar.

 

•    Normal acceleration: Perpendicular to movement in circular movements.

 

•    Partial mean speed: Average of all speeds values from the beginning of itinerary up to this moment.

 

•    Speed: Current speed.

 

•    Speed limit: Speed limit established for the current road.

 

•    Tangential acceleration: Component of linear acceleration tangent to the path.

 

•    Velocity made good: Right direction’s velocity component to the following waypoint.

 

•    Vertical speed: Descending speed (vertical component of speed value).

 

Bearings

 

•    Bearing: Current course.

 

•    Bearing to next: Course towards to the next waypoint.

 

•    Compass: Compass representation.

 

•    GOTO arrow: Arrow that indicates the course towards to the next waypoint.

 

•    Magnetic bearing: Course followed according to the inner device compass.

 

Effort

 

•    % HRR: Heart Rate Reserve.

 

•    % Maximum heart rate: Maximum heart rate.

 

•    Accumulated power: Total amount power from the begining of itinerary up to the current position.

 

•    Cadence: Current cadence at this moment (based on pedal stroke frequency).

 

•    Current power: Current power at this moment (based on pedal stroke frequency).

 

•    Heart rate zone (% Max.): Predefined heart rate intensity zones.

 

•    Heart rate zone (% Max-Rest): Predefined heart rate intensity zones (Cardiac frequency in reserve).

 

•    Heart rate: Current heart rate at this moment.

 

•    Instantaneous cadence: Current cadence at this moment (based on power meter data).

 

•    Instantaneous power: Current power at this moment (based on power meter data).

 

•    Left (or combined) pedal smoothness: How smoothly power is delivered to the left pedal.

 

•    Left torque effectiveness: How much of the power delivered to the left pedal is pushing it forward.

 

•    Maximum power: Maximum power achieved from the begining of itinerary.

 

•    Mean power: Average of all power values.

 

•    OCA: Optimum chainring angle.

 

•    Pedal power: Relative power left-right.

 

•    Powermeter: Power of the last pedaling.

 

•    Right pedal smoothness: How smoothly power is delivered to the right pedal.

 

•    Right torque effectiveness: How much of the power delivered to the right pedal is pushing it forward.

 

•    Total energy: Total odometer energy.

 

•    Trip energy: Partial odometer energy.

 

GPS

 

•    Coordinates: Coordinates of the current position.

 

•    Differential GPS: GPS gives differential signal (submetric accuracy).

 

•    HDOP: Horizontal Dilution Of Precision (estimated current accuracy of the GPS).

 

•    PDOP: Position Dilution Of Precision (estimated current position accuracy of the GPS).

 

•    Precision: Error margin of the GPS.

 

•    Used satellites: Satellites fixed in current position.

 

•    VDOP: Vertical Dilution Of Precision (estimated current vertical accuracy of the GPS).

 

Flight

 

•    Altitude ground level: Altitude from the ground level.

 

•    L/D goal: Minimum glide ratio required to reach your goal (going through all intermediate waypoints).

 

•    L/D instant glide ratio: Glide ratio dividing horizontal distance by vertical (descending).

 

•    L/D required: Minimum glide ratio required to reach next waypoint (distance to waypoint divided by waypoint’s altitude over ground level).

 

•    Land altitude: Altitude of the land provided by the 3D relief map (*.CDEM).

 

•    Slope to next waypoint: Slope from your current position to next waypoint.

 

•    Slope to destination: Remaining slope till destination is reached.

 

•    Vertical speed: Descending speed (vertical component of speed value).

 

General

 

•    Air pressure: Present atmospheric pressure provided by the barometric altimeter.

 

•    Battery: Remaining energy in your device.

 

•    City: Current city.

 

•    Croquis: Image displaying manoeuvres.

 

•    Current lap: Identifies the lap where you are at the present moment.

 

•    File name: Name of the current track.

 

•    Free memory: Remaining memory in your device.

 

•    Next waypoint name: Name of the following waypoint.

 

•    Next2 waypoint icon: Icon associated to the waypoint following the next waypoint.

 

•    Number of points: Track points saved up to current position.

 

•    Place name: Name of the element of your current position.

 

•    Radar icon: Displays an icon when entering the radius of a radar.

 

•    Radius turn: Radius of the turn that you are taking at the moment.

 

•    Relative humidity: Current humidity rate.

 

•    Signpost: If available, road indications are displayed.

 

•    Temperature: Current temperature.

 

•    Virtual free memory: Virtual free memory in your device.

 

NOTE: Due to platform restrictions, some functions may only be available in certain platforms.