Functions accessible from: 'Main menu > Settings > Sensors'
Follow these steps to connect your sensors and start receiving information from them:
1. Install the sensors as required and activate them before attempting to connect to them.
2. Go to ‘Main menu > Settings > Sensores’.
3. Press ‘Add sensor’ and select the type of sensor you want to add.
|
|
|
|
4. For some sensors you’ll have to specify certain technical details. The pairing process between the device and the sensor will then begin.
5. Once detected, the sensor will be saved and connected automatically during an activity.
6. The data received from the sensor will be stored with the recorded track and displayed on the data pages.
NOTE: Do not use Vaseline or oils to moisten the conducting band, as they can insulate the transmitter. Do not bend or stretch the heart rate strap. Keep it away from heat and cold. When you finish your activity, clean it and dry it to avoid moisture build-up.
