Check full list of data fields and their usage. These fields are displayed in the data pages and the data bar, but you can configure which fields to show according to your needs from ‘Main menu > Settings > Activity profiles > Data pages’:
Distances
•Deviation from route: Distance to active route.
•Distance to TrackAttack: Distance between your current position and the position of the ‘TrackAttack’.
•Distance to next radar: Distance to next radar point.
•Distance to destination: Distance to destination (last waypoint of the route).
•Distance to next: Distance to the next waypoint.
•Lap odometer: Distance covered from the begining of the current lap section up to the current position. Value reseted every time a new lap section is started.
•Profile odometer: Accumulated distance of your current profile (hiking, mountain bike...). Value not automatically reseted every time the device is turned off.
•Route percentage: Percentage of the route that has been already done.
•Total odometer: Accumulated distance of all your trips. Value not automatically reseted every time the device is turned off. The device can calculate the total distance using different data calculations.
•Trip odometer: Distance covered from the beginning of itinerary. Value reseted every time the device is turned off.
Altitudes
•Altitude at next: Predicted altitude to next waypoint if current trajectory is maintained.
•Altitude: Altitude from the sea level.
•Altitude difference to destination: Difference between the altitude of destination and current altitude.
•Altitude difference to next: Difference between the altitude of the next waypoint and current altitude.
•Altitude ground level: Altitude from the ground level.
•Ascent to next: Ascent to the next waypoint.
•Ascent to destination: Ascent till destination is reached.
•Barometric altitude: Altitude provided by the barometric altimeter.
•Current depth: Current depth value taking as reference the nautical chart.
•Depth at next: Depth value at next waypoint
•Depth at prow line: Current depth value at prow line.
•Descent to next: Descent to the next waypoint.
•Descent to destination: Descent until the destination.
•GPS altitude: Present altitude provided by GPS rerceives via satellites.
•Graph: Representation of the track being covered.
•Land altitude: Altitude of the land provided by the 3D relief map (*.CDEM).
•Lap climb: Total amount climbed from the begining of the current lap section up to the current position.
•Lap descent: Total amount descended from the begining of the current lap section up to the current position.
•Maximum altitude: Reached during your itinerary.
•Slope: Slope of your current movement.
•Slope at next: Slope till the distance set at 'Next slope distance'.
•Trip ascent: Total amount climbed from the begining of itinerary up to the current position.
•Trip descent: Total amount descended from the begining of itinerary up to the current position.
Times
•Chronometer: Starts counting when started.
•Estimated hour at destination: Estimated time of arrival to destination (last waypoint of the route) at present speed.
•Estimated hour at next: Estimated time of arrival to the next waypoint (at present speed).
•Estimated time to destination: Estimated time to reach destination (last waypoint of the route) at current speed.
•Estimated time to destination (cruise): Estimated time to reach destination (last waypoint of the route) at cruise speed.
•Estimated time to next: Estimated time to reach next waypoint at current speed.
•Estimated time to next (cruise): Estimated time to reach next waypoint at cruise speed.
•Lap chronometer: Time elapsing the current lap section from the begining of the current lap section up to the current position.
•Stopped time: Total amount of time without moving.
•Sunrise: Sunrise time.
•Sunset: Sunset time.
•Time: Current time according to the selected time zone.
•Time to TrackAttack: Time difference between you and the ‘TrackAttack’.
•Time in movement: Total amount of time moving.
•Time without package: Elapsed time since last time GPS signal was received.
Speeds
•Current pace: Speed in minute/kilometer.
•Lap mean speed: Average of all speeds values from the begining of the current lap section up to the current position.
•Lap pace: Average of all pace values from the begining of the current lap section up to the current position (speed in minute/kilometer).
•Maximum speed: Maximum speed in current itinerary.
•Mean moving speed: Average of all speeds values above the minimum speed movement.
•Mean speed: Average of all speeds values.
•Mean moving pace: Average of all pace values above the minimum speed movement.
•Mean pace: Average of all pace values.
•Moving pace: Average of all pace values avoiding stopped points.
•Next radar speed: Displays maximum speed allowed by the next radar.
•Normal acceleration: Perpendicular to movement in circular movements.
•Partial mean speed: Average of all speeds values from the beginning of itinerary up to this moment.
•Speed: Current speed.
•Speed limit: Speed limit established for the current road.
•Tangential acceleration: Component of linear acceleration tangent to the path.
•Velocity made good: Right direction’s velocity component to the following waypoint.
•Vertical speed: Descending speed (vertical component of speed value).
Bearings
•Bearing: Current course.
•Bearing to next: Course towards to the next waypoint.
•Compass: Compass representation.
•GOTO arrow: Arrow that indicates the course towards to the next waypoint.
•Magnetic bearing: Course followed according to the inner device compass.
Effort
•% HRR: Heart Rate Reserve.
•% Maximum heart rate: Maximum heart rate.
•Accumulated power: Total amount power from the begining of itinerary up to the current position.
•Cadence: Current cadence at this moment (based on pedal stroke frequency).
•Current power: Current power at this moment (based on pedal stroke frequency).
•Heart rate zone (% Max.): Predefined heart rate intensity zones.
•Heart rate zone (% Max-Rest): Predefined heart rate intensity zones (Cardiac frequency in reserve).
•Heart rate: Current heart rate at this moment.
•Instantaneous cadence: Current cadence at this moment (based on power meter data).
•Instantaneous power: Current power at this moment (based on power meter data).
•Left (or combined) pedal smoothness: How smoothly power is delivered to the left pedal.
•Left torque effectiveness: How much of the power delivered to the left pedal is pushing it forward.
•Maximum power: Maximum power achieved from the begining of itinerary.
•Mean power: Average of all power values.
•OCA: Optimum chainring angle.
•Pedal power: Relative power left-right.
•Powermeter: Power of the last pedaling.
•Right pedal smoothness: How smoothly power is delivered to the right pedal.
•Right torque effectiveness: How much of the power delivered to the right pedal is pushing it forward.
•Total energy: Total odometer energy.
•Trip energy: Partial odometer energy.
GPS
•Coordinates: Coordinates of the current position.
•Differential GPS: GPS gives differential signal (submetric accuracy).
•HDOP: Horizontal Dilution Of Precision (estimated current accuracy of the GPS).
•PDOP: Position Dilution Of Precision (estimated current position accuracy of the GPS).
•Precision: Error margin of the GPS.
•Used satellites: Satellites fixed in current position.
•VDOP: Vertical Dilution Of Precision (estimated current vertical accuracy of the GPS).
Flight
•Altitude ground level: Altitude from the ground level.
•L/D goal: Minimum glide ratio required to reach your goal (going through all intermediate waypoints).
•L/D instant glide ratio: Glide ratio dividing horizontal distance by vertical (descending).
•L/D required: Minimum glide ratio required to reach next waypoint (distance to waypoint divided by waypoint’s altitude over ground level).
•Land altitude: Altitude of the land provided by the 3D relief map (*.CDEM).
•Slope to next waypoint: Slope from your current position to next waypoint.
•Slope to destination: Remaining slope till destination is reached.
•Vertical speed: Descending speed (vertical component of speed value).
General
•Air pressure: Present atmospheric pressure provided by the barometric altimeter.
•Battery: Remaining energy in your device.
•City: Current city.
•Croquis: Image displaying manoeuvres.
•Current lap: Identifies the lap where you are at the present moment.
•File name: Name of the current track.
•Free memory: Remaining memory in your device.
•Next waypoint name: Name of the following waypoint.
•Next2 waypoint icon: Icon associated to the waypoint following the next waypoint.
•Number of points: Track points saved up to current position.
•Place name: Name of the element of your current position.
•Radar icon: Displays an icon when entering the radius of a radar.
•Radius turn: Radius of the turn that you are taking at the moment.
•Relative humidity: Current humidity rate.
•Signpost: If available, road indications are displayed.
•Virtual free memory: Virtual free memory in your device.
NOTE: Due to platform restrictions, some functions may only be available in certain devices.